8 Outlet Manifold 16mm & Manifold Tee are a fantastic addition to the growers irrigation system. 16mm Tee/Female 1/2".

Elbow Barbed Jointer; 90 degree; Create angles to connect your pond hose in your system; Fits hose with internal diameter of 6mm 

T Reducing Straight Tee Pneumatic Connector Fitting Unequal Dia 4mm-16mm Push-In. Claber 1/2"-1/4" reducing T-joint is used to branch off 1/4” (4 - 6mm) feeding tube sections from 1/2” (13 - 16mm) main tube

A very simple way to run 4 way dripper lines from one supply tube. Simply connect to a supply tube using a  barbed tee BSP connection.

Autopot 16mm 6mm Cross Connector. These connectors are perfect for reducing 16mm pipe down to 6mm pipe, when using large systems.

Plant!t 8" Watering Ring a connecting Tee piece that allows you to attach standard 13mm (½”) hose or tubing.

XStream The Propagator Spray Head is a direct replacement part for the X-Stream Aeroponic Propagator. 

The TopSpin 25mm Dripper Manifolds are better suited to larger irrigation setups and fit onto 25mm tube.

32mm Elbow Barbed Jointer; 90 degree; Create angles to connect your pond hose in your system; Fits hose with internal diameter of 32mm

The FloraFlex Multi Flow bubbler is an 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool.

AutoPot easy2GO kit can be installed anywhere in the home, greenhouse, conservatory or patio & multiple kits can be linked together to keep larger volumes of plants watered while you’re away

These connectors are perfect for reducing 16mm pipe down to 9mm or 6mm pipe, when using large systems. connectors work perfectly for the new 9mm pipe Autopot pipe, used in the latest version of the AQUAvalve 5

Barbed Tee Piece (6mm, 16mm, 19mm, 25mm, 32mm) - Sturdy, Robust & Reliable. Splits Flow of Water in 2 Directions.

The double inlet tee can be connected to three pipes or even a Y-shape fitting, thanks to its 12mm supply tube connection and two 16mm inlet tube connections.

IWS Standard Fittings 16mm are used with both the Basic, and Remote, Flood and Drain Systems.

Use the Male & Female BSP Threaded sockets to connect any BSP screw fittings to create further modifications to your bespoke irrigation system. The measurement of these fittings refers to the internal diameter of the required pipework.

A very simple way to run 4 dripper lines from one supply tube. Simply connect to a supply tube using a  barbed tee BSP connection.

Elbow Barbed Jointer; 90 degree; Create angles to connect your pond hose in your system; Fits hose with internal diameter of 16mm 

Elbow Barbed Jointer; 90 degree; Create angles to connect your pond hose in your system; Fits hose with internal diameter of 12mm 

Use the IWS 25mm Elbow fitting, Pro Tee fitting, Washer, and Plastic Nut to reduce the chances of a leak.

These Aquaking Pump Reducer are for converting the outlet of an Aquaking pump to use either 13mm or 25mm (inner measurement) tubing.

Elbow Barbed Jointer; 90 degree; Create angles to connect your pond hose in your system; Fits hose with internal diameter of 20mm 

Auto inline Filter 16 - 6mm allows easy connection to 16mm pipe. The filter then reduces to 9mm or 6mm allowing easy connection to any AutoPot Watering Systems of between 1 and 6 modules.

The AQUAvalve cover, when used in conjunction with the AQUAvalve allows the grower to create their own basic, but very effective, hobby system.