Blue fast flow drip stake are used as a part of hydroponic set used for fast drainage media such as clay pebbles.

XStream The Propagator Spray Head is a direct replacement part for the X-Stream Aeroponic Propagator. 

Elbow Barbed Jointer; 90 degree; Create angles to connect your pond hose in your system; Fits hose with internal diameter of 6mm 

Elbow Barbed Jointer; 90 degree; Create angles to connect your pond hose in your system; Fits hose with internal diameter of 12mm 

Barbed Tee Piece (6mm, 16mm, 19mm, 25mm, 32mm) - Sturdy, Robust & Reliable. Splits Flow of Water in 2 Directions.

The double inlet tee can be connected to three pipes or even a Y-shape fitting, thanks to its 12mm supply tube connection and two 16mm inlet tube connections.

Heavy duty plastic leach tray with 2 drain elbows & end caps. Designed to work with 6in rock wool slabs, but also works well with a variety of other growing mediums.

Elbow Barbed Jointer; 90 degree; Create angles to connect your pond hose in your system; Fits hose with internal diameter of 16mm 

Elbow Barbed Jointer; 90 degree; Create angles to connect your pond hose in your system; Fits hose with internal diameter of 20mm 

Icetube - the same high quality of Iceline with a different name. Icetube lowers the temperature of the nutrient solution in your system using a simple but effective dual-core design.

IWS Standard Fittings 16mm are used with both the Basic, and Remote, Flood and Drain Systems.

This copper disc sits (copper side up) in the bottom of your IWS inner pot, preventing roots from penetrating downwards and blocking up the system.

T Reducing Straight Tee Pneumatic Connector Fitting Unequal Dia 4mm-16mm Push-In. Claber 1/2"-1/4" reducing T-joint is used to branch off 1/4” (4 - 6mm) feeding tube sections from 1/2” (13 - 16mm) main tube

A very simple way to run 4 dripper lines from one supply tube. Simply connect to a supply tube using a  barbed tee BSP connection.

With the FloraFlex Matrix System water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushed outward into eight maze sections that have individual holes dripping the water and nutrients onto the Wicking Pad.

A very simple way to run 4 way dripper lines from one supply tube. Simply connect to a supply tube using a  barbed tee BSP connection.

Grow Tank Replacement Delivery Tube/Pipe/Hose For GT424, GT604 and GT901 NFT systems.

These connectors are perfect for reducing 16mm pipe down to 9mm or 6mm pipe, when using large systems. connectors work perfectly for the new 9mm pipe Autopot pipe, used in the latest version of the AQUAvalve 5

Autopot 16mm 6mm Cross Connector. These connectors are perfect for reducing 16mm pipe down to 6mm pipe, when using large systems.

Ideal for irrigation pipes, the 16mm Barbed Cross directs water flow exactly where it is needed. These connectors are perfect for reducing 16mm pipe down to 9mm or 6mm pipe, when using large systems.

Use the IWS 25mm Elbow fitting, Pro Tee fitting, Washer, and Plastic Nut to reduce the chances of a leak.

Use the Male & Female BSP Threaded sockets to connect any BSP screw fittings to create further modifications to your bespoke irrigation system. The measurement of these fittings refers to the internal diameter of the required pipework.

32mm Elbow Barbed Jointer; 90 degree; Create angles to connect your pond hose in your system; Fits hose with internal diameter of 32mm

8 Outlet Manifold 16mm & Manifold Tee are a fantastic addition to the growers irrigation system. 16mm Tee/Female 1/2".